Dual SIM 4G router is a compact, rugged 3G/4G/LTE cellular networking solution designed for mission-critical connectivity in the most challenging environments. It is designed especially for M2M (Machine to Machine), Scada and In-Vehicle applications.
The router is designed to withstand extreme temperatures, humidity, shocks, vibrations, dust, reverse polarity, and transient voltage. Our solution is a tried and tested and is widely used in more than twenty industrial fields, such as CCTV security surveillance, Vehicle, telemetry, Vending machines, Power control, AMR, Traffic management, Oil field, Weather forecast, Environmental protection, Streetlamp control, Postal department, Banks and many other areas.
The device is designed in such a way that it ensures the message is delivered to your server. It contains a Dual sim slot which acts as a fail-safe. Usually the two SIM Cards are from the different mobile network and so when the primary SIM fails, the other is backup SIM takes over and ensures that the message is delivered. The device is very easy to install and you can easily configure this device remotely saving you a lot of time and money.
FEATURES | DETAILS |
---|---|
Hardware | CPU: 580Mhz RAM: 512Mb DDR, option up to 2Gbit Flash: 128M, option for up to 4Gbit |
WAN | Integrated Category 12/9/6/4/3 LTE Advanced LTE modem (with DC-HSPA+/ EVDO/3G and 2G failover) One 10/100Mbps Ethernet ports – cable/DSL/T1/satellite/Metro Ethernet WiFi as WAN, Metro WiFi MIMO “N” 2.4 GHz 802.11 a/b/g/n |
LAN | 802.11 a/b/g/n Three LAN/WAN switchable 10/100Mbps Ethernet ports |
Ports | Power (DC Jack, 2 Pin Terminal Block for wire connection) 3 Ethernet LAN/WAN 2-4 cellular antenna connectors (SMA) 1 GPS antenna connector (SMA) 2 WiFi antenna connectors (SMA) Serial connector – RS232 / RS485 (Terminal Socket) 4 Digital I/O ports (Terminal Socket) TF (MicroSD card slot) Console Port (Terminal Socket) |
Power | Dual Power Inputs / Power Failover POE (Power over Ethernet) DC input steady-state voltage range: 5-40 VDC / 5-60VDC option, (requires inline fuse for vehicle installations) For 9–24 VDC installations, use a 3 A fuse For > 24 VDC installations, use a 2.5 A fuse Reverse polarity and transient voltage protection per ISO 7637-2 Ignition sensing (automatic ON and time-delay OFF) Power consumption: Idle: typical=100mA@12VDC Maximum=500mA@12VDC Tx/Rx typical=300mA@12VDC Maximum=800mA@12VDC 12VDC 2A adapter recommended |
LEDs | SYS*1, GPS*1, TF*1, Cell1 Online*1, Cell1 Signal*4, Cell2 Online*1, Cell2 Signal*4, VPN*1, WAN*1, LAN*2, WiFi*1 |
UIM/SIM Card Slot | Support 1.8V/3V UIM/SIM cards, two sim card slots |
Size | PCBA: 108mm x 105mm x 22mm With case: 136mm x 109mm x 45mm |
Weight | About 450g (not including the antenna) About 550g (including the antenna) About 850g (including all accessories, without package) |
Temperature | All models: −35 °C to 75 °C ambient air operating All models: −40 °C to 85 °C storage |
Humidity | 5% to 95% operating 5% to 95% storage |
Case | Aluminum alloy; Black color; Customization is available |
Din Rail Mounting | Yes |
Others | Reset button, Console port |
With over 25 years of industry expertise, our group company specializes in delivering comprehensive solutions for Electrical Infrastructure and Power Distribution.